Product Code: 3101603
Disassemble and reassemble your own flow battery(Vanadium Redox Battery) stack of individually connected cells with theFlex-Stak. The Flow Battery Flex-Stak comes in a 1-cell stack configurationthat makes it easy to switch out the provided cell with your own test cell. The stack is an excellent learning tool that gives hands-on experiencewith promising vanadium redox battery technology. Whether itÃ¢â¬â¢s advancedresearch, creating your own lab or conducting professional training the FlowBattery Flex-Stak has a load of practical applications.
The Flex-Stak is a fully assembled, tested, and ready foruse flow battery! Only a flathead screwdriver and torque wrench arenecessary to assemble the Flex-Stak so you can concentrate on creatingyour very own powered applications.
Stack Contents Include:
Endplates with Push-to-Connect Fittings
Wetted PVC and CPVC
Interdigitated Flow Fields
Wetted Vinyl Ester
Electrode Area: 10 cmÂ²
Flow Rate: 10 to 80 cc/minute at 1 Amp 1Volt for charging
For Charging: 1 Amp / 1 Volt
Liquid is fed into the bottom and outthe top.
Dimensions: 3.25" x 3.25" x2" (8.26 x 8.26 x 5.1 cm)
Recommended Torque Value: 8-10 inlbs
Flow Battery's Flow Rate
TheFlow Battery Flex-Stak's flow rate should be started at 10 cc per minute and goup to 100 cc per minute. The overall flow rate will be determined by the state ofcharge of the electrolyte.
Which Side is Positive and Negative?
When your Flow Battery has a chargedelectrolyte inside of it you can than tell which side is positive and whichside is negative. When charging the Flow Battery make sure that the liquid isfed into the bottom and out the top.