Call UsCall Us : +918452810712

Fuel Cell Stacks

Product Image (Fuel Cell Start / Run Block)

Fuel Cell Start (Run Block)

The Fuel Cell Start / Run Block is perfect for Horizon Fuel Cells: Horizon H-100, 100 Watt Fuel Cell Horizon H-200, 200 Watt Fuel Cell Horizon H-500, 500 Watt Fuel Cell

Product Image (Cell Voltage Monitor 48)

Cell Voltage Monitor 48

Advantages: Up t 48 cell vltages per mdule 0 – 4.5 V per channel High accuracy up t ± 0.1 mV Integrated vltage limit mnitring ptimized fr fuel cells, redx-flw-batteries, electrlyzers and batteries

Product Image (G-HFCS-60W (60 W Hydrogen Fuel Cell Power Generator))

G-HFCS-60W (60 W Hydrogen Fuel Cell Power Generator)

Output Performance: Nominal Power: 60 W Nominal Voltage: 13 VDC ✔ Nominal Current: 4.6 A ✔ DC Voltage Range: 10-19 VDC ✔ Efficiency: >50% at the nominal power Hydrogen Fuel: Hydrogen Purity: >99.99% (CO content being <1 ppm) Hydrogen Pressure: 0.45 - 0.6 bar Hydrogen Consumption: 708 mL/min (at nominal power) Environmental Characteristics: Ambient Temperature: -5 to +35 ºC Ambient Humidity: 10% RH to 95% RH (No misting) Storage Ambient Temperature: -10 to +70 ºC Noise: <60 dB Physical Characteristics: Stack Size (mm): 125 x 88 x 85 Stack Weight: 550 g Controller Size (mm): 87 x 38 x 113 Controller Weight: 240 g

Product Image (UP400 -Portable Fuel Cell Based Smart Generator(FC-SMARTGEN))

UP400 - Portable Fuel Cell Based Smart Generator (FC-SMARTGEN)

Technical Data: Output voltage: 12 V Max continuous charging current: 32 A (at 12 V) Cold cranking amps: N/A Max continuous power output: 400 W Max charging power per day: 800 Ah Electricity source: Proton exchange membrane fuel cell Fuel: Compressed hydrogen (99.99% purity) Fuel consumption: 5.2 L/min (at 400 W) Batteries: 12.8 V (2.5 Ah LiFePO4) Size: 525 mm x 153 mm x 256 mm (L x W x H) Weight: 10 kg Operating temperature: -20 to +50 deg Celsius Storage temperature: -20 to +50 deg Celsius User Interface: On unit via Bluetooth to mobile or PC

Product Image (D350XR (350 W Solid Oxide Fuel Cell Power Generator))

D350XR (350 W Solid Oxide Fuel Cell Power Generator)

TECHNICAL DATA: Power: Continuous Power Output: 350 W Output Voltage: 28 V Output Current: 12.5 A Environments: Operating Temperature: -20 to 55 ºC Storage Temperature: -32 to 71 ºC Humidity: 0% - 95% RH (non-condensing) Operating Altitude: Up to 15000 ft / 4500 meters Non-detect ability range: 50 meters MTBF: 20 mission cycles Shock: 100 G vertical and 40 G axial Rain: Tolerant to light rain Dust and sand: Tolerant to fine dust Operation: Weight:6.4 lb / 2.9 kg Dimensions: 6.2" (H) x 12.6" (L) x 5.9" (W) Maximum exhaust temperature: 500 ºC Fuel: Propane / LPG Fuel Pressure: 15 psi Fuel Consumption: 66 - 134 grams / hour Air Consumption: 2.5 CFM Start Up Time: 18 minutes Thermal Cycles: 20 cycles Run Hours: 200 hours Applications: Unmanned aerial vehicles and drones Unmanned ground systems (UGSs) or unmanned ground vehicles (UGVs) Unmanned underground robotics Sensors in the field Robotics Autonomous power

Product Image (GreenBox 2 - 100)

GreenBox 2 - 100

Technical Data: Rated Power: 75W Current Output: 220/230 VAC - 110/120 VAC - 50/60Hz Supply Pressure: 6 - 25 bar Hydrogen Purity: 99.995% (grade 4.5) Max H2 Flow Rate: 1.6 L/min Size: 40.5 x 30 x 20 cm Weight: 11 kg Socket: European standard

Product Image (Quattro Fuel Cell H2/O2/Air)

Quattro Fuel Cell H2/O2/Air

Quattro Fuel Cell H2/O2/Air, F105 - Technical Specifications: Power in Fuel Cell H2/O2 Mode: 2 W Power in Fuel Cell H2/Air Mode: 600mW Dimensions (H x W x D): 2.5" x 2.4" x 2.5" (62 x 60 x 62 mm) Weight: 2.6 oz (78 g)

Product Image (Tee Tube Connectors (2))

Tee Tube Connectors (2)

Use these Tee Connectors with tubing to split or combinegases from an electrolyzer. They are very useful when using more than onefuel cell for electrolysis. These connectors will also help minimize leaks in yourlines—these single-barbed fittings have a smooth surface that creates snugtubing connections. Fittings can be sterilized with steam (autoclaving).

Product Image (Methanol Fuel Cell)

Methanol Fuel Cell

Direct Methanol Fuel Cell, 111 - Technical Speciications: Electrode Area: 4 cm2 Generated Power: 10 mW Generated Voltage: 300 - 500m V DC uel: Approx. 3% Methanol Solution (by weight) Dimensions (H x W x D): 2" x 2" x 1.6" (50 x 50 x 40 mm) Weight: 2.1 oz (60 g)

Product Image (G-HFCS-3kW48V (3kW Hydrogen Fuel Cell Power Generator))

G-HFCS-3kW48V (3kW Hydrogen Fuel Cell Power Generator)

Output Performance: Nominal Power: 3000 W Nominal Voltage: 48 V Nominal Current: 62.5 A DC Voltage Range: 40 - 72 V Efficiency: >50% at the nominal power Hydrogen Fuel: Hydrogen Purity: >99.99% (CO content being <1 ppm) Hydrogen Pressure: 0.04 - 0.06 MPa Hydrogen Consumption: 35.1 L/min (at nominal power) Environmental Characteristics: Ambient Temperature: -5 to +35 ºC Ambient Humidity: 10% RH to 95% RH (No misting) Storage Ambient Temperature: -10 to +50 ºC Noise: <60 dB Physical Characteristics: Stack Size (mm): 320*268*115 Stack Weight: 7.000 kg Controller Size (mm): TBD

Product Image ((4) Tubing Clamps)

(4) Tubing Clamps

(4) Tubing Clamps Brand: Fuel Cell Store Product Code: 623002 White tubing clamps for use with 3/32" to 1/4" diameter tubing. Attach clips to the end of tubing to stop the flow of water or gas when using tubing on compatible fuel cell. Temperature Range: 32 to 200°F Quantity: 4

Product Image (Double Fuel Cell H2/O2/Air)

Double Fuel Cell H2/O2/Air

Double Fuel Cell H2/O2/Air, F104 - Technical Specifications: Power in Fuel Cell H2/O2 Mode: 1 W Power in Fuel Cell H2/Air Mode: 300mW Dimensions (H x W x D): 2.2" x 1.6" x 2" (56 x 42 x 40 mm) Weight: 2.1 oz (60 g)

Product Image (Double Reversible Fuel Cell H2/O2/Air)
Product Image (Protium-50)

Protium 50

Technical Specifications: Rated/Gross Power: 50/60W Rated/Gross Current: 4.2/5A Voltage Output: 12-18V DC Start-up Time: 5s Operating Ambient Temp.: (0,40]°C Operating Altitude: 1500m AGL System Weight: 480g Dimensions: 130 × 76 × 85 mm

Product Image (Flow Battery Flex-Stak)

Flow Battery Flex-Stak

Technical Specifications: Electrode Area: 10 cm² Ports: 4 Flow Rate: 10 to 80 cc/minute at 1 Amp 1 Volt for charging For Charging: 1 Amp / 1 Volt Liquid is fed into the bottom and out the top. Dimensions: 3.25" x 3.25" x 2" (8.26 x 8.26 x 5.1 cm) Recommended Torque Value: 8-10 inlbs

Product Image (Flex-Stak Electrochemical Cell)

Flex-Stak Electrochemical Cell

Technical Properties: MEA Active Area: 3.2 x 3.2cm (10cm²) MEA Membrane Area: 5.3 x 5.3cm Fittings: 4 x 1/8" Push-to-connect (2 per reactant side) Graphite Plate Overall Dimensions (L x W x D): 6.3 x 6.3 x 0.4 cm Recommended Torque Value: 8-10 inlbs

Product Image (Flex-Stak Kit)

Flex-Stak Kit

Technical Properties: MEA Active Area: 3.2 x 3.2cm (10cm²) MEA Membrane Area: 5.3 x 5.3cm Graphite Plate Overall Dimensions (L x W x D): 6.3 x 6.3 x 0.4 cm Recommended Torque Value: 8-10 inlbs

Product Image (Fuel Cell Stack 3)

Fuel Cell Stack 3

Technical Specifications: Power Per Cell: 200 mW Total Power (3 Cells): 600 mW Generated Voltage: 0.4 - 0.96 V per cell Electrode Area: 4cm² per cell Dimensions (H x W x D): 2.4" x 3.7" x 2.8" (60 x 95 x 70 mm) Weight: 7.4 oz (211 g)

Product Image (Fuel Cell Stack 10)

Fuel Cell Stack 10

Technical Specifications: Power Per Cell: 200 mW Total Power (10 Cells): 2 W Generated Voltage: 0.4 - 0.96 V per cell Electrode Area: 4cm² per cell Dimensions (H x W x D): 2.4" x 7" x 2.8" (60 x 178 x 70 mm) Weight: 15.2 oz (430 g)

Product Image (Protium-150)

Protium 150

Technical Specifications: Rated Power: 150W Rated Current: 12.5A Voltage Output: 12-18V DC Start-up Time: 5s Operating Ambient Temp.: (0,40]°C Operating Altitude: 1500m AGL System Weight: 470g Dimensions: 109 x 101 x 84 mm

Product Image (GreenHub 2 PRO 500)

GreenHub 2 PRO 500

Technical Data (DC Version): Rated Power: 450W Rated Voltage Output: 48 V DC Output DC (1A): USB / 12 V DC Hydrogen Purity: 99.995% (grade 4.5) Supply Pressure: 6 - 25 bar Max Hydrogen Flow Rating: 7 L/min Size: 40 x 60 x 25 cm Weight: 21 kg

Product Image (G-HFCS-600W24V (600 W Hydrogen Fuel Cell Power Generator))

G-HFCS-600W24V (600 W Hydrogen Fuel Cell Power Generator)

Hydrogen Fuel: Hydrogen Purity: >99.99% (CO content being <1 ppm) Hydrogen Pressure: 0.04 - 0.06 MPa Hydrogen Consumption: 7000 mL/min (at nominal power) Environmental Characteristics: Ambient Temperature: -5 to +35 ºC Ambient Humidity: 10% RH to 95% RH (No misting) Storage Ambient Temperature: -10 to +50 ºC Noise: <60 dB Physical Characteristics: Stack Size (mm): 205*168*90 Stack Weight: 1.965 kg Controller Size (mm): TBD Controller Weight: TBD System Size (mm): 205*205*130 System Weight: 2.590 kg.

Product Image (Fuel Cell H2/O2/Air)

Fuel Cell H2/O2/Air

Fuel Cell H2/O2/Air, F103 - Technical Specifications: Power in Hydrogen and Oxygen Mode: 900 mW Power in Hydrogen and Air Mode: 300 mW Electrode Area: 2.9 cm² Generated Voltage: 0.45 - 0.96 V DC Dimensions (H x W x D): 2.0" x 2.0" x 1.6" (51 x 51 x 41 mm) Weight: ~2oz (58 g)

Product Image (300W Liquid Cooled PEM Fuel Cell Stack)

300W Liquid Cooled PEM Fuel Cell Stack

Output Performance: Nominal Power: 300 W Nominal Current: 18 A (at nominal power) Open Circuit Voltage: 30 V Number of cells in the stack: 30 Operational Voltage Range: 15 - 30 V Efficiency: 45% at 300W Hydrogen Fuel Requirement: Hydrogen Purity: >99.99% (CO content being <1 ppm) Hydrogen Pressure: 250 - 350 mbar Hydrogen Consumption: 4.5L/min (at nominal power) Environmental Characteristics: Ambient Temperature: 5 to 55 ºC Physical Characteristics: Stack Size (mm): 175*85*95mm Stack Weight: 1.7kg Couplings: G1/4" (Female Thread)

Product Image (GreenHub 2 – 5000)

GreenHub 2 – 5000

Technical Data (DC Version): Rated Power: 4500W Rated Voltage Output: 48 V DC Output DC (1A): USB / 12 V DC Hydrogen Purity: 99.995% (grade 4.5) Supply Pressure: 6 - 25 bar Max Hydrogen Flow Rating: 70 L/min Size: 100 x 80 x 21 cm Weight: 90 kg

Product Image (P250i (250 W Solid Oxide Fuel Cell Power Generator))
Product Image (Boost Buck DC Converter)

Boost Buck DC Converter

Boost Buck DC Converter Brand: Fuel Cell Store Product Code: 202173 This Boost Buck Converter can be stabilized at 12 V regardless if the input voltage is 5, 12 or 32 V. These converters are great for a car regulator, solar photovoltaic cells, wind power, and other applications of voltage instability. This converter will work with the Horizon 12W, 20W, and 30W PEM Fuel Cells Stacks. It is also suitable for the 5-cell, 10-cell, 15-cell, or 20-cell Flex-Stak Assembled units. This converter is not designed for single cell units. Features: Input Voltage Range: 3.8 - 32 V Output Voltage Range: 1.25 - 35 V Input Current: 3A (max) Conversion Efficiency: < 94% Switching Frequency: 400 KHz Output Ripple: 50 mV Load Regulation: +/- 0.5% Operating Temperature: -40 to +85

Product Image (DC/DC 3A Buck Converter)

DC/DC 3A Buck Converter

Features: Input Voltage Range: 4 - 35 V DC Output Voltage Range: 1.23 - 30 V DC Adjustable Input Current: 3A (max) Voltmeter Range: 0 - 40 V Conversion Efficiency: 92% Switching Frequency: 150 KHz Output Ripple: 30 mA (max)

Product Image (Fuel Cell Monitor Pro 4.0)

Fuel Cell Monitor Pro 4.0

Features: External measuring transformer card for measuring and recording the characteristics of fuel cell models: voltage, current, and time Connects to a computer via USB cable Supplied software allows you to plot the fuel cell stack’s voltage-current, power-voltage, power-current, power-time characteristics Recording can be done automatically, at certain voltage or current points or manually Data recording as .txt or .csv format

Product Image (Fuel Cell Voltage Monitor - CVM1)

Fuel Cell Voltage Monitor - CVM1

Technical Specifications: USB (Universal Serial Bus) - USB v2.0 high speed device; bus powered CAN (Controller Area Network) - Up to 16 possible slave addresses RS-232/RS-485 Serial Interface - Modbus Available Configuration Software - Included software application allows you to set up, log, and analyze up to 16 CVMs in one application. Software Development Tool-Kit - Provided SDK allows developers to develop custom software applications DLL’s and LabView VI’s available. Dimensions - 4.7” x 4.1” x 1.2” (121 x 104 x 32 mm) at 0.55 lb (250 g)

Product Image (Mini DC/DC Converter)

Mini DC/DC Converter

This DC/DC converter is specially modded by the Fuel Cell Store for low voltage operation for single cell or small fuel cells. With an input voltage as low as 0.3 V and a user selectable output voltage of either 3.3V or 5V, this DC/DC is well suited for when you would like to use a single cell fuel cell (such as the Mini PEM Reversible, Mini PEM Fuel Cell, or Flex-Stak) to replace or even charge batteries. The input voltage can range from 0.3 V (good for single cell fuel cells) up to 5.5 V (good for stacks up to ~9 cells). The output is 5V at 600mA Max (default) or 3.3V at 200mA max (solder jumper adjustable).

Product Image (Moisture Trap)

Moisture Trap

Key Features: Operating pressure 150 psig with clear polycarbonate bowl Max Operating temperature 52°C Water removal 1.0µm Automatic Drain Designed for pressurized gas line Maximum Flow 260 L/min

Product Image (Multimeter / Voltmeter)

Multimeter / Voltmeter

The Multimeter is designed to measure the voltage and current of fuel cells, electrolyzers input and solar panels. Measures DC and AC Voltage, DC Current and Diode and attaching a K type probe (not included) will allow users to measure temperature as well. A convenient knob audible continuity and well marked settings make measurements a breeze. Use this multimeter to test and record the different electrical inputs and outputs of your fuel cell system. Max Current Measurement: 10 Amps

Product Image (Syringe (Without Needle))

Syringe (Without Needle)

Technical Specifications: Capacity: 0.170 oz (5 cc) Color: Semi-Clear

Product Image (USB DC/DC 3A Step Down Converter)

USB DC/DC 3A Step Down Converter

Features: Input: 6V - 40V Output: 5V 3A (max) Efficiency: 92% (max) Switching frequency: 150kHz Working temperature: -40°C to +85°C Load capacity: maximum output 3A Size (L x W x H): 59 x 21 x 17 mm

Product Image (Wye Tube Connectors (2))

Wye Tube Connectors (2)

Use these Wye Connectors with tubing to split or combine gases from an electrolyzer. They are very useful when using more than one fuel cell for electrolysis. These connectors will also help minimize leaks in your lines—these single-barbed fittings have a smooth surface that creates snug tubing connections. Fittings can be sterilized with steam (autoclaving).

Product Image (Adapter for HYDROFILL PRO)

Adapter for HYDROFILL PRO

  • Delivery Time:15 Days
Product Image (Flex-Stak Expansion Kit)

Flex-Stak Expansion Kit

  • Delivery Time:15 Days
Product Image (316 Stainless Steel Flexible Hose - 4 Feet)
X