Brand: Fuel Cell Store
Product Code: 2014008
Monitor voltages for battery systems and fuel cells withthe Cell Voltage Monitor (CVM) by Fuel Cell Store.
At a low overall cost, this high speed system is greatfor measuring high quantities of voltages. Each system is capable of measuring32 channels of isolated Analog Inputs at up to 5 kHz and a 16-bit (63 uV)resolution. The very low power (< 2.5 W) means it can be integrated intosystems where every watt counts.
Custom software for standalone operation as well asdrivers and LabView examples for easy integration into yourmonitoring systems are included.
Fuel Cell Voltage Monitor FeaturesInclude:
16-bit(63 uV) resolution
Small size (4.7" x 4.1" x2.1")
High Speed (5 kHz)
Multiple units can be daisy chained
On-board data logging (uSD card)
Monitor temperatures with Two K-Type T/Cinputs
Configuration Software and Software DevelopmentKit Included!
USB (Universal Serial Bus) - USBv2.0 high speed device; bus powered
CAN (Controller Area Network) - Upto 16 possible slave addresses
RS-232/RS-485 Serial Interface - Modbus Available
Configuration Software - Included software application allows you toset up, log, and analyze up to 16 CVMs in one application.
Software Development Tool-Kit - Provided SDK allows developers todevelop custom software applications DLLÃ¢â¬â¢s and LabView VIÃ¢â¬â¢s available.
Dimensions - 4.7Ã¢â¬Â x 4.1Ã¢â¬Â x 1.2Ã¢â¬Â (121 x 104 x 32 mm) at 0.55 lb (250g)
32-Channel Isolated Analog Input
0.05% Accuracy (NIST Calibrated)
Â±2 VDC range/channel
5 kHz sample rate (full 32 channels)
1 kV Isolation
85 VDC Common Mode Rejection
2 K-Type Thermocouple Inputs
0Â°C to1024Â°C temperature range
Internal Cold junction compensation
Additional Analog Inputs(Optional)
10 bit resolution
0 - 2.048 VDC (5 VDC tolerant) withreference to ground
Additional Digital I/O (Optional)
Independently configurable as I/O
3.3 VDC logic level (5 VDC tolerant)with reference to ground
Supportsdata logging to microSD card
CSV file for analysis at a later date
USBpowered or 8 - 30 VDC external DC
Less than 2.5 watts total powder,