Flex-Stak Electrochemical Cell

Product Description

Flex-StakElectrochemical Cell

ProductCode: 10620005

Disassemble and reassemble your own fuel cell stack ofindividually connected cells with the Flex-Stak Electrochemical Cell.  TheFlex-Stak comes in a 1-cell or 5-cell stack configuration depending on yourrequirements.  The ease of use makes it simple to scale the Flex-Stak todifferent power levels and integrate equipment and/or sensor.  TheFlex-Stak fuel cell is an excellent learning tool that gives hands-onexperience with promising fuel cell technology.  Whether its advancedresearch on MEAs, creating your own fuel cell lab or conducting professionaltraining the Flex-Stak has a load of practical applications.

The Flex-Stak Electrochemical Cell comes withoutMEAs and closed independent flow channels allowing reactant flows on eachside of a membrane. Only a flathead screwdriver (1/4 inch) and torque wrench (1in/lb, 3/8 inch nut) are necessary to assemble the Flex-Stak ElectrochemicalCell so you can concentrate on creating your own applications.

The Flex-Stak is a dismantable electrochemical stack thatallows for users to input their own custom PEM MEAs for testing! Independentreactant flow on each side of the MEA allows this setup to be used in manydifferent setups.

Stack Contents Include:

 Plastic Endplates
 Anode configuration on both sides of the bipolar plate
 Expandable Design
 No MEAs are included with this flex-stak
 Hardware

Technical Properties:

 MEA Active Area: 3.2 x 3.2cm (10cm)
 MEA Membrane Area: 5.3 x 5.3cm
 Fittings: 4 x 1/8"Push-to-connect (2 per reactant side)
 Graphite Plate Overall Dimensions (L x Wx D): 6.3 x 6.3 x 0.4 cm
 Recommended Torque Value: 8-10inlbs